Continued from page How to Install Mikrotik Server

Continued from page How to Install Mikrotik Server

• after it select the IP and then select the sub menu Routes

• Then enter the IP gateway, by pressing the plus button + in
  her left hand corner is the IP of the modem is 192.168.1.1, then press the OK button

• After all the above steps completed, the next step is to fill in DNS
  menu by selecting IP> DNS

• Select Settings and enter the IP dns, with the primary DNS 202.134.1.10
  (default speedy) the second secondary DNS 202.134.0.155 (DNS speedy)

• Once completed the final stage you have to do, namely to make the rule be in use locally. This stage is very important, where communication lancard 1 with lancard 2 put here. The essence of the above settings are in this stage, until then do not mistaken.
• Choose IP> Firewall> NAT> General

• Chain = srcnat, Out interface = Publik (interface which we have been given public name) and then select action = masquerade and then press the OK button to end.

• Restart the router by pressing the New Terminal, then typed script system reboot, and press Y

• Once finished restart your view how do check ping, go to the New terminal at the gateway 192.168.1.1 ping, ping the DNS 202.134.1.10, if it does replay mean the router is OK

[admin@rt/rw_2] > ping 202.134.1.10
202.134.1.10 64 byte ping: ttl=60 time=60 ms
202.134.1.10 64 byte ping: ttl=60 time=62 ms
202.134.1.10 64 byte ping: ttl=60 time=80 ms
202.134.1.10 64 byte ping: ttl=60 time=77 ms
202.134.1.10 64 byte ping: ttl=60 time=77 ms
8 packets transmitted, 8 packets received, 0% packet loss
round-trip min/avg/max = 60/73.5/80 ms
[admin@rt/rw_2] >

• If there Riquest Time Out, review your brarti on your router or on your lancard, or on your modem, or on your connections with the speedy 
• Now the installation can be completed in say, live IP forwarding to all clients starting from 10.10.10.2 and 10.10.10.30 setersunya up because we created earlier subnets 30 hosts.

Back To How to Install Mikrotik Server